Wednesday, March 4, 2015

Paluu Potter's Peakiin - Potter's Peak revisited

Kun mun nukkekotihullaantumiseni alkoi, keksin innoissani  pykätä Pottereille oman linnan, jossa vanha liinavaatekaappi muodosti linnan kolme ekaa kerrosta ja siihen päälle kyhäsin vanerisen jatko-osan. No, tuolla se tönöttää neitseellisessä asussaan yhä edelleen... Mikä itseasiassa taitaa olla hyvä asia!

When my dollhouse obsession was sparked I decided I wanted to make the Potters a castle of their own. The first three floors are an old linen cabinet and on top of that I built the upper floors out of sturdy plywood. Well, the "castle" is still in its birthday suit so to speak... which actually turns out to be a good thing!


Kaverini Katriina toi mulle autolastillisen vankkoja putkia torneja varten ja siitä se ajatus sitten lähti... päätin nyt, että rakennan yläkerrokset uudelleen näitä putkia käyttäen! Tai yritän ainakin ;) Itseasiassa aion pitää tuon kaapin päällä olevan ekan kerroksen ja rakennan siitä ylöspäin putkia käyttäen.

My friend Katriina brought me a carful of these sturdy tubes to use for towers and I've now decided to rebuild the upper floors using these! Or at least I'll try to ;) Actually I'll keep the first floor I built on top of the cabinet and then use the tubes to build up from there.


Putket ovat todella vankkoja, niden seinämät on sentin paksuiset! Niitä on kolmea kokoa - kapein on sisähalkasijaltaan 10 cm, keskimmäinen 16 cm ja levein 30 cm.

The tubes are really sturdy, the walls are 1 cm thick! There are three sizes - the narrowest is 10 cm across on the inside, the middle on is 16 cm and the widest is 30 cm.



Tää vaatii huolellista suunnittelua. Mun täytyy keksiä miten näitä on järkevintä työstää ja pinnottaa ja sahata jne.... Ensinnäkin haluan tietenkin tehdä ulkopinnoista kivilinnan näköisiä, kysymys kuuluu miten, rakennelmasta kun tulee valtava. Ihan vaan kivipaperi ois tietysti helpoin, mutta toisaalta haluisin siihen semmosta rosoisempaa pintaa. Kananmunakennot ois yks tie eivätkä ne lisäis painoa entisestään raskaisiin putkiin, mutta johan siinä menisi tonni rasioita ja ikuisuus niitä laittaessa.

Pohdin, josko päällystäisin putket pikasilotteella tai vastaavalla ja muotoilisin kivet siihen, mutta kysymys kuuluu tarttuisko se miten hyvin tohon pintaan. Ideaali olisi, jos pinta ois sekä kivimäinen että kestävä.  Aion rakentaa tornit osissa, jotta voin nostaa osan pois työstettäväksi ja takasin ja siksi pinnan täytyis kestää käsittelyä jonkun verran. Jos pinta olis puuta, sekottaisin varmaan jonkunlaista laasti/silote-vesi-puuliima-seosta, mutta mites nyt? Entä maalaisinko ulkopinnatkin pohjamaalilla ennen kuin lätkäsisin silotteen, vai pistänkö siloteseoksen suoraan putken raakapinnalle? Ideoita vastaanotetaan kiitollisuudella!

This requires careful planning. I need to decide how best to work with this kind of material, how best to saw and decorate it etc.... First of all I want the facade to be of stonework, the question s how to do it as the structure will be huge. Using stone imitation paper would be easiest, but I'd like the stonework to be more textured than that. Egg carton stones would be one option that wouldn't add a lot of weight to the already heavy tubes, but that would require a ton of cartons and an eternity of work.

I think a light coating of some kind of filler or plaster or whatever might be the best option, then I could slap it on and form the stonework out of that. But how well will it adhere to the surface of the tubes? Ideally I want the stonework to be as realistic as possible but also as durable as possible. I will build the towers in sections that can be lifted on and off, one section at a time for ease of work but that means the stonework has to be able to take some handling. If the surface was wood I'd most likely mix filler with water and wood glue, but what to use now? Also, do you think i should paint the outer walls with primer before starting to put up the stonework or should I slap the filler directly on the tube's untreated surface? Ideas are extremely welcome!



Tein tommosen raakaversiopiirrustuksen siitä, mitä haluaisin tehdä - siniset viivat edustavat seinää, jonka viereen linna on nousemassa - tuo alaspäin tuleva sininen viiva on verholippa, josta joudun saahaamaan palan pois jos tämä ottaa onnistuakseen :D

Here's a rough first draft of what I'm planning. The inky lines represent the wall the castle will stand next to - the shorter ink line coming down a ways is one of those curtain boards - I'll have to saw a piece out of it to fit in the castle if this works :D




3 comments:

Isabel Ruiz said...

Me parece un proyecto fantástico. Estoy deseando verlo.

The grandmommy said...

Nice plans! I have a lot of those cardboard tubes. What saw did you use to cut it?

Taika Taiga said...

oisko rapatun oloinen tapetti paras ratkaisu putkien päällystämiseen? Todellisuudessa torneja tuskin on rapattu, nutta Potterilassahan se kävisi. Tapetti on sen verran paksua että siihen saisi tylpällä kivien välejäkin painettua, jos tykkäät kivistä.